Troubleshooting Tips

RADAR / LASER DETECTOR

Download and Connect to Drive Smarter

Power on the MAX 360c MKII.

Download and Install the Drive Smarter

app on your smartphone.

After registering your account in the

Drive Smarter

app, press the Account

button and then select “Add New Device”.

Note: the ﬁrst time you run the app,

you will be prompted to register a

new account.

Follow the prompts in the

Drive Smarter

app to connect

MAX 360c MKII and your mobile

Wi-Fi hotspot.

Troubleshooting Tips

If your unit is not operating properly, please follow these

troubleshooting steps:

• Make sure the power cord is properly connected to your MAX 360c MKII

• Make sure the socket of your vehicle’s cigarette lighter or 12V accessory

port is clean and free of corrosion

• Make sure the power cord’s adapter is ﬁrmly seated in the socket of the

cigarette lighter or 12V accessory port and the power LED is on

For detailed and up-to-date FAQs, please visit https://support.escortradar.com

drivesmarter.com/downloads

FCC Part 15.19 Warning Statement

FCC ID:QKLM13C. Contains FCC ID:VPYLBEE59B1LV THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO

THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,AND (2) THIS DEVICE MUST ACCEPT ANY

INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

FCC NOTE: Modiﬁcations not expressly approved by the manufacturer could void the user's FCC granted authority to operate the equipment.

FCC Part 15.21 Warning Statement

NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE

FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

FCC Part 15.105(b) Warning Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.