The Complete Driver Alert System OWNER’S MANUAL
Contents INTRODUCTION...................................................................................................................... 3 MAXcam 360c FEATURES...................................................................................................... 3 PRODUCT SERVICE AND SUPPORT..................................................................................... 4 WHAT’S IN THE BOX..............................................................................................................
Introduction Introduction Congratulations! You’ve made the smart choice by purchasing a MAXcam 360c from Escort. The Escort MAXcam 360c provides peace of mind by continuously recording the road in beautiful HD video. With cutting-edge features, phenomenal video quality, and an industry-leading focus on user experience, the Escort MAXcam 360c is the best solution to record your ride.
Introduction Introduction CONTROLS & FEATURES Camera Lens EZ Mag Mount™ Area Speaker (Bottom of unit) Power Program (Hold for Emergency Recording) Mark Sensitivity Rotary Dial Turn to change volume/setting Brightness Mute Display Power Press to power on. Hold for two seconds to power off. MRK To mark a location for future alerts: SEN Press SEN to adjust the X and K band radar detection sensitivity/range. Auto = speed adjusted. The slower you travel, the shorter the X and K band detection range.
Installation Installation Your new detector comes with our latest EZ Mag Mount™. Simply slide the detector onto the mounting bracket fully and that’s it. To remove the detector from the mount, simply pull the detector off of the mount. Mounting Tips: • Center of windshield between driver and passenger. • Ensure clear view of road ahead and sky above. • Avoid windshield wipers and heavily tinted areas. To mount the detector in your vehicle: 1 Remove backing from EZ Mag Mount.
Installation continued Operation Mount to Windshield Attach EZ Mag Mount to MAXcam 360c DOWNLOAD AND CONNECT TO Drive Smarter® 1 Power on MAXcam 360c. 2 Install and run the Drive Smarter® app on your smartphone. 3 In the Drive Smarter® app, press the Account button then select “Add Camera”. 4 Follow the prompts in the Drive Smarter app to c onnect MAXcam 360c and your mobile Wi-Fi hotspot. Note: the first time you run the app, you will be prompted to register a new account.
Operation Operation DISPLAY AND MENU OSP/Speed Limit UNDERSTANDING YOUR DETECTOR Signal Band Indicator Front Signal Strength Meter Rear Signal Strength Meter Signal Counter • Signal Band Indicator Displays the radar band of the alert: - • OSP/Speed Limit Indicator Over Speed alert setting, can be adjusted in the Programming menu. Bluetooth icon will appear X Band (commonly false alerts). here when paired to phone.
Operation Operation UNDERSTANDING YOUR DASH CAMERA PROGRAMMING MENU Loop Recordings Overview Once the SD card is full, the camera will continuously overwrite the oldest footage recorded with recent recordings. To protect a clip so that it will not be overwritten, hold the PRG button for two seconds so that the clip is moved into the locked content partition. To access the Programming menu, press the PRG button. “Programming” will be displayed.
Operation Operation Press SEN to go from one category to the next User Mode Advanced* Novice Access and customize all Settings and Preferences Access and customize Units and Display Color only,(all other Settings are set to factory defaults) NOTE: Switch back to Advanced Mode to view all Preferences.
Operation Operation Press SEN to go from one category to the next Press VOLUME + or – to change your setting within a category 17 Press SEN to go from one category to the next Press VOLUME + or – to change your setting within a category 18
Operation Operation Press SEN to go from one category to the next Press VOLUME + or – to change your setting within a category Display Color The display graphics can be changed to blue, green, red or orange to match the instrument lighting of your vehicle. Speed Display Turns Speed Display off or on. When Speed Display is off, the vehicle’s voltage is displayed. Cruise Alert While traveling below the set Cruise Alert speed, all alerts sound a short double beep.
Operation Operation Spec FR Tones The Spec FR meter mode displays the numeric frequency and band of the highest priority threat along with a front and rear bar graph of its signal strength. The left bar graph shows the signal in front of the detector while the right bar graph shows the signal strength from the rear. If there are multiple alerts present, only the signal strength of the highest priority threat is displayed. Laser is the highest priority threat, followed by Ka, K, then X band radar.
Operation Operation AutoLearn AutoPower The AutoLearn feature analyzes (over time) the source of radar signals by location and frequency. This allows MAXcam 360c to determine if a fixed location signal is a real threat or a false one. If it determines that the signal is an automatic door opener, motion sensor, etc., it automatically locks out this source at this particular location. A “Stored” message will appear on the display when a signal has been automatically locked out.
Operation Operation To Mark A Location Bluetooth - Press MRK. The display will read “Mark?” Press MRK again to bring up a menu of markers to choose from. Turns on and off Bluetooth connection to a smartphone. - Use the Rotary Dial to scroll through the markers then press MRK to select the marker that you wish to use at this location. Auto Update - The display will read “Marked!” Selects which software is updated automatically when connected to a Wi-Fi hotspot. Default is All.
Operation Operation Parking Mode DASH CAM INSTRUCTIONS Parking Mode uses the G-Sensor to monitor while your vehicle is parked. The idea is that when you are parked, the dash cam will be “sleeping”, but it will monitor for G-Sensor impacts. If it detects an impact, then the unit will wake up and start recording. View and Edit Videos on your Smartphone The camera will enter parking mode after 5 minutes. If there is no movement during this period, the display will turn off and the recording will stop.
Trademarks Acknowledgment, Warnings, and Regulatory Information Troubleshooting PROBLEM SOLUTION Detector beeps briefly at the same location every day, but no radar source is in sight. A motion sensor or intrusion alarm is located within range of your route. If you have AutoLearn enabled, the factory default setting, then MAXcam 360c will store this signal after about 3 passes and no longer alert to it. Detector did not alert when a police car was in view.
Warranty LIMITED 1-YEAR WARRANTY Escort, Inc. (“Escort”) warrants that this product and the component parts thereof, will be free of defects in workmanship and materials for a period of one year from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser. If the product is under warranty, it will be repaired or exchanged depending on the model as determined at Escort’s sole discretion. Such remedy shall be your sole and exclusive remedy for any breach of warranty.
