Owner's Manual

Operation
Operation
25 26
To Mark A Location
- Press MRK. The display will read “Mark?” Press MRK again to bring up a menu of markers to
choose from.
- Use the Rotary Dial to scroll through the markers then press MRK to select the marker that you wish
to use at this location.
- The display will read “Marked!”
Air Patrol locations cannot be marked by the user.
Note: When a location is marked the first time, you must travel at least 1 mile away from that location to
receive an alert when you return to the area.
To Unmark A Location
Touch the MRK button when you are receiving a marked-location alert. The display will read “Unmark?”
Touch the MRK button again to confirm. The display will read “Unmarked!”
Clear Locations
At some point, you may wish to clear some of the data in MAXcam 360c’s database. This may include
any of the following: Defender Database data, Marked locations or false alert Lockouts.
To clear locations in the selected database, select the database then press MUTE to confirm. Format
clears locations in all databases.
Wi-Fi
Turns on and off Wi-Fi connection to a hotspot.
NOTE: Compatible with 2.4 and 5 GHz hotspots.
Bluetooth
Turns on and off Bluetooth connection to a smartphone.
Auto Update
Selects which software is updated automatically when connected to a Wi-Fi hotspot. Default is All.
Requires Drive Smarter
®
mode Wi-Fi connection to a hotspot with internet access.
Wi-Fi Update
Manually force the detector to search for updated software. Press MUTE to make the selection then
follow display prompts. Requires Drive Smarter® mode Wi-Fi connection to a hotspot with internet
access.
Camera Settings
If you modify Camera Settings then this setting will show Modified.
Video Record
Turns on and off video recording.
Note: Once the SD card is full, the camera will continuously overwrite the oldest footage recorded with
recent recordings. To protect a clip so that it will not be overwritten, press and hold the PRG button so
that the clip is moved into the locked content partition.
Microphone Record
Turns on and off the microphone for video recording.
Loop Clip Time
Sets the duration of video clips.
G-Sensor
MAXcam 360c includes a built in G-Sensor which allows the device to determine when
the car has been in a collision. If a collision is detected, MAXcam 360c automatically
locks the recording being made at the time of the accident. You can use this setting
to set the sensitivity of the G-Sensor from 1-3 or turn it off. Level 1 is the easiest to
activate and may lock files due to bumps. Level 3 is the hardest to activate the G-sensor.