User Manual

16 | Page
To Unmark A Location
Touch the MRK button when you are receiving a marked-location alert. The display will read
“Unmark?” Touch the MRK button again to confirm. The display will read “Unmarked!”
Clear Locations
At some point, you may wish to clear some of the data in RedLine 360c’s database. This may
include any of the following: Defender Database data, Marked locations or false alert Lockouts.
To clear all data in RedLine 360c’s database, select Format then press SEN to confirm.
Wi-Fi
Turns on and off Wi-Fi connection to a hotspot.
Bluetooth
Turns on and off Bluetooth connection to a smartphone.
Auto Update
Selects which software is updated automatically when connected to a Wi-Fi hotspot. Default is
All.
Wi-Fi Update
Manually force the detector to search for updated software. Press BRT to make the selection
then follow display prompts.
Interface
Mode 1 – Select when using Escort ZR5 or ZW5 with RedLine 360c
Mode 2 – Select when using an aftermarket vehicle interface with RedLine 360c
Restore factory Settings
To restore RedLine 360c to its original factory settings, press and hold MRK and BRT while
turning the power on. A Restored message will display, acknowledging the reset.
Serial Number and Software Version
To view your RedLine 360c’s serial number and software revision, press and hold the MRK and
MUTE buttons while powering on the detector.