Owner's Manual

Quick Reference Card 3-4
Quick Reference Guide 6-
7
Installation 8-9
• Battery Installation 8
• Optional
12-volt SmartCord 8
• Mounting Location 8
• Windshield Mount 9
Controls and Features
10-13
• Power On/Off 10
• AutoPwr 10
• Volume Control 10
• Power-on indication / Alert 10
• Mute
10
• AutoMute 10
• SmartMute™ 11
• Battery Status / Voltage 11
• Low Battery Warning
11
• Mode Switch (Highway/Auto/City) 11
• Brightness 11
• Audible Alerts 12
• Signal Strength Meter 12
• ExpertMeter
12-13
EZ-Programming 14-19
• How To Use EZ-Programming
14
• Example of EZ-Programming 14
• Overview of EZ-Programming 15
• Details of EZ-Programming 16-19
Technical Details 20-25
• Interpreting Alerts 2
0-21
• How Radar Works 22
• How Laser Works 23
• How Safety Radar Works 2
4-25
Service 26-31
• Troubleshooting 26-27
• Service 28
• Warranty 2
8-29
• Accessories 29
• Specifications 30
• Registration 31
 Remove card along perforations 
Table of Contents
5 4
Solo S3 Quick Reference Card
Press the RVW button to go Press the CHG button to change
from one category to the next your setting within a category
PILOT LIGHT Pilot HWY * Full word: Highway or Auto or City
(Options using Pilot H Letter: H or A or C
12-volt SmartCord) Pilot H.> Letter, with scanning dot
Pilot + Symbol: + or
•
or --
Pilot +.> Symbol, with scanning dot
Pilot +> Scanning symbol
AUTO POWER aPwr Motn * Uses motion to turn Solo S3 off
aPwr Time Uses time to turn Solo S3 off
aPwr Off Turn Solo S3 on and off manually
POWER-ON SEQUENCE PwrOn STD * Standard power-on sequence
PwrOn FST Fast power-on sequence
SIGNAL STRENGTH METER Meter STD * Standard signal strength meter
Meter EXP Expert Meter
AUTOMUTE aMute ON * AutoMute on
aMute OFF AutoMute off
AUDIOTONES Tone STD * Standard tones
Tone LOUD Loud tones
CITY MODE SENSITIVITY City STD * Standard City mode sensitivity
City LoX Low X band sensitivity in City Mode
City NoX No X band sensitivity in City Mode
BRIGHTNESS Brt AUTO * Brightness is controlled automatically
Brt MIN Minimum brightness when turned on
Brt MED Medium brightness when turned on
Brt MAX Maximum brightness when turned on
Brt DARK Full Dark Mode when turned on
BANDS Bands ALL * All bands enabled
Bands MOD One or more bands are enabled
Turn bands ON/OFF by
pressing the mute button
X ON or OFF * X-band detection on
K ON or OFF * K-band detection on
Ka ON or OFF * Ka-band detection on
LSR ON or OFF * Laser detection on
SWS ON or OFF * SWS detection off
VG2 ON or OFF * VG2 detection off
* Solo S3’s Factory Settings
 Remove card along perforations 