Installation guide

Driver Configuration

Manual • Doc. No.: C.2001.21 / Rev. 3.0 •

CAN-API Installation

Page 24 of 112

2.4 Driver Confi

uration

This chapter is valid for the operating systems Windows 2000, Windows XP/Server 2003 and Windows

Vista, described in the preceding chapters.

To configure some settings of the device driver or check the installed version you have to open the

Windows Device Manager. All device drivers for

esd

CAN modules are installed in the CAN Interface

class as shown below.

To configure the driver you have to double-click the device instance to open the

Properties

dialogue

of the device. Select the

Feature

tab.