Installation guide

Windows 95/98/ME Installation

Manual • Doc. No.: C.2001.21 / Rev. 3.0 •

CAN-API Installation

Page 36 of 112

7. The following window, which displays all esd-CAN drivers, has to open (this example only

shows the ISA/331 driver). Select the driver of your board and click

8. (Only for CAN-ISA boards, otherwise continue with step 9) Windows 9x/ME installs the driver,

checks the system resources, compares them to the configurations possible for the CAN-ISA

board and offers a possible configuration for the board in the following window:

The

Input/Output range

proposed by the system control does not have to correspond to the

default-I/O range which is set on board by means of jumpers or coding switches.

Attention:

Therefore it is absolutely necessary to compare the jumper (or coding switch)

position on the CAN-ISA board to the I/O-address space selected by the

system, and change the jumpers/coding switches, if required.