Installation guide

Windows 95/98/ME Installation
Manual • Doc. No.: C.2001.21 / Rev. 3.0 •
© 2000-2007 esd gmbh
CAN-API Installation
Page 42 of 112
2.6.2.4.4 Changing the Logical Network Number
1. Double click the device class
CAN Controller
in the device manager.
The tree branches and all devices of this type available in your computer are shown.
2. Double clicking a device opens its property window.
Click the
Status
icon in the property window.
3. In
Physical Net Mapping
logical network numbers can be assigned to the physical interfaces of the
CAN board. By means of the network numbers the CAN board can be addressed by the software.
When starting the driver for the first time, logical network numbers starting from 0 are assigned to
boards supported by the driver. If more than one esd CAN board of various types (e.g. CAN-
PCI/331 and CAN-ISA/331) are used in a computer, overlapping network numbers cannot be
avoided and therefore have to be set manually.
4. A change in logical network numbers remains invalid until the computer is restarted.