Installation guide

Installation of the CAN-Bluetooth Module Under Windows

Manual • Doc. No.: C.2001.21 / Rev. 3.0 •

CAN-API Installation

Page 50 of 112

2.9.2 Configuration

After the installation you will find in menu

Start

under

Programs

the configuration program

esd Bluetooth CAN Interface Driver.

Here you select

CANBT Config

and the window

CAN Control

Panel

opens.

Here the following settings can be made:

Interface

The software supports a maximum of five different esd-CAN Bluetooth interfaces.

Here you select the interface that you want to configure.

Base Net

Here the logical CAN network number is entered. Values between 0 and 255 are

permissible.

Virtual COM

The Bluetooth interface is managed as virtual COM-interface. Values between 1 and

11 are permissible.

Note:

Bluetooth devices usually use virtual serial interfaces for communication.

The assignment between COMx and Bluetooth device is configured by

means of the software which controls your Bluetooth hardware (such as

PC-Card).