Installation guide

SGI-IRIX6.5 Installation
Manual • Doc. No.: C.2001.21 / Rev. 3.0 •
© 2000-2007 esd gmbh
CAN-API Installation
Page 86 of 112
4.5 SGI-IRIX6.5 Installation
Note:
The ‘object mode’ of the CAN-API is not supported by SGI-IRIX6.5 .
4.5.1 Files of the SGI-IRIX6.5-Package
The software drivers for SGI-IRIX6.5 are shipped on a 3.5” disk. The disk contains the following files:
File Description
c331
CAN driver (object code) The letter combination ‘
c331
’ indicates
the files of module CAN-PCI/331. For
other modules these letters will be
substituted as follows:
c331.master
driver configuration file
c331.sm
driver configuration file CAN Module File Name
CAN-PCI/331
CPCI-CAN/331
PMC-CAN/331
c331
CAN-PCI/405
pci405
makefile
makefile for installing and loading the driver
ntcan.o
ntcan-API
ntcan64.o
ntcan-API / 64-bit version
ntcan.h
Header for the ntcan-API
cantest.c
source code of the example program ‘cantest’ (see CAN-API manual part 1
[1])
cantest
binary file of the example program ‘cantest’
Table 25:
Files of the SGI-IRIX6.5 package