Installation guide

SGI-IRIX6.5 Installation
CAN-API Installation
Manual • Doc. No.: C.2001.21 / Rev. 3.0 •
© 2000-2007 esd gmbh
Page 87 of 112
4.5.2 Sequence of Installation Under SGI-IRIX6.5
1. Login as Root
2. Unpacking the Archive
In order to unpack the tar-archive of the CAN modules CAN-PCI/331, CPCI-CAN/331 and
PMC-CAN/331 you have to call the following command:
tar -xvf c331-IPyy-vx.x.x.tar
with
x.x.x
= software driver version (e.g. 2.1.0)
yy
= processor identification (e.g. ‘32’ for SGI-O2)
In order to unpack the tar-archive of the CAN module CAN-PCI/405 you have to call the
following command:
tar -xvf esdcan-pci405-irix-mips-x.x.x-IPyy-z.z
with
x.x.x
= software driver version (e.g. 0.3.2)
yy
= processor identification (e.g. ‘27’)
z.z
= operating system version (e.g. ‘6.5’)
3. Change Directory (e.g. CAN-PCI/331, CPCI-CAN/331 and PMC-CAN/331)
cd c331-IPXX-v2.1.0
4. Install Driver Data
smake install
5. Load Driver
smake load
If the driver has been installed and loaded correctly, a message of the driver
has to appear on the screen now.