Instructions / Assembly

User Tips and Warning!
Keep it away from the children during the installation.
Avoid installing where the temperature or humidity is high.
Avoid placing objects in front of the motion detector that may affect illuminating performance.
Avoid installing the unit near air conditioners, central heaters, or outdoor area without water/weatherproof
protection.
As with a typical DIY or replacement light project for custom-made considerations visit your local hardware
store or consult experienced electric technician for assistance on your specific mounting accessories and
installation needs. User and Installer have to consider application site’s environmental condition and specific
lighting purpose to decide best mounting and installation arrangement.
All installation procedures must follow their local safety standards and building, electric regulations.
Specifications
Important Safety Information
Do not dispose of battery in fire. This may result in an explosion.
Do not expose the light to fire or intense heat as the battery may explode.
Do not immerse in water.
Never look directly into the light or shine it into another person’s eyes.
Follow proper safety tips to prevent from falling off a ladder.
Consult your local construction safety guide if needed for installing
the light fixture on a building.
One Year Limited Warranty
guarantees this product to be free from defects in material & workmanship for (1) year.
This warranty does not apply to damage from misuse or incorrect installation/ connection.
This warranty does not cover accessories, bulbs, batteries, high voltage accidents, alterations, unauthorized use or repair, neglect, misuse, abuse, damages or defects resulting from normal wear
and tear (including chips, fading scratches, abrasions or discoloration due to usage or sun exposure), or failure to follow instructions for care and maintenance, fire, flood, and Acts of God.
This warranty does not include liability for incidental or consequential damages.
is not responsible for any damages in excess of the retail purchase price of the product under any circumstances. The consumer is responsible for the installation of, removal of, and
reinstallation of the product.
Rev. EE118WMC 02082016 Page 2
Apply as Dusk to Dawn Automatic SMART Activity Lights:
For hallway/corridor, stairway, public restroom, elevator lobby and any secured common area. The unit(s) is just as easy to connect with AC
power (120V AC) as any standard new or replacement lights. When the power is all the time, this light will automatically convert to its
light sensing function, and it will only illuminate to the pre-set ambient light level and detect any movement within the delay period time.
You can adjust the motion sensor sensitivity, delay time and starting ambient light level as required for your application. (refer: Fig. 3)
Doppler Motion Sensitivity:
Turn the knob clockwise to increase the sensitivity of motion detection, reverse way to decrease its sensitivity. Unlike other types of motion
sensors (PIR e.g.), Doppler/Microwave sensor can detect through most nonmetallic blocking obstacles, therefore the movement is
detected before coming into the area covered with motion sensitivity and the lighting response has no delay. Its average coverage area has
a controllable range of around 5 to 50 feet diameter when mounted at a height of 8-10 feet. (refer: Fig. 3, 4)
Delay Timer:
The light can be set to functionally stay ON for any period of time between approx 8 sec. to maximum of 12 min. by turning the Timer knob
to adjust. Any movement detected during this time elapse will re-set the timer. It is recommended to select the shortest time for adjusting
the Sensitivity detection performance via the walk test, after this testing it is recommended to turn back to maximum position. (refer: Fig. 3)
Ambient Light Level:
Use this LUX knob to adjust when the illumination is started depending on the specific conditions and level of environmental darkness at
night or daylight level and the occupancy area as desired. (refer: Fig. 3)
Auto Dimming Down as Power SMART Saving & Safety Mode (recommended):
, then this light can automatically dim down its illumination
brightness level to 5%-30% of maximum level after the expired delay period when no movement is detected, then it will run up to the
maximum illumination level when any movement is detected in the coverage area, it is always provide a unique safety lighting profile.
Motion Activated as Energy Saving or Security Sensing Mode (traditional):
, then this light can automatically shut OFF after expired delay period (as
traditional motion light function) when no movement is detected, then it will light-up with MAX brightness illumination when any movement
is detected in the coverage area.
DIM
AC Power source: 100-240V/AC 50/60Hz
180 SMD-LED Load: 18W (100W lamp)
LED specifications: FM-2835WNS
LED Color: Warm white (3000K), Pure White (5000K)
Lamp Brightness: 1250Lm (white); 1000Lm (warm)
Protection: IP43, Class2
Light Fixture Material:
Doppler sensor FREQ.: 5.8GHz
RF Sensing Power: <0.3mW
Detection range: 3-53feet/1-16m x 360° Diameter@6-10feeet High
Delay Time Range Setting: 8sec to 12min
Ambient Light Level Setting: 10-2000lux (Dusk to Dawn illumination)
Operating Temperature: -4F to +125F
Light Unit Size: 12"/310mm (D) x 6-½”/165mm (H)
Weight: 1.5Lbs
Approvals: FCC, CE
6'-10'