Instructions / Assembly

136.3mm
132.2mm
eSenlite
®
Wall/Ceiling-Mount, Outdoor/Indoor 2-Head Motion-Activated LED Light
“SMART” - Always Lights Up …!!!
EE128WeP series User Manual
Black
277.4mm
Packing list in
LED Infrared Motion Sensor
Twin Light
LEDS 48PCS
Φ6 Plastic expansion
4x30 Screw
Quantity
1X 4X 4X
White
EE128WeP is a 2 head LED light with built-in infrared motion detection technology – ePIR. It
can be used or replaced as traditional motion-activated light for indoor/outdoor applications in
all weather conditions, with outstanding energy-saving ability and long operating life cycles.
Specifications
Power source: 100-130V/AC
Power frequency: 50/60Hz
Rated load: 9W Max.
Detection range: 33±3Ft Max. (24°C)
Time setting: 5sec - 8min (adjustable)
Light-control: <10LUX~2000lux (adjustable)
Detection angle 120°
Color temperature: 2800K-3200K 5000K-5500K
ePIR Detection Reference
LED quantity: 48PCS (0.5W, T2835)
LED specifications: T2835
Luminous flux: 700lm
Detection motion speed: 0.6~1.5m/s
Working temperature: –10°C ~ +40°C
Working humidity: <95%RH
Installation height: 6’-9’ (wall installation)
IP rating: IP65
6-10 Ft
35Ft
120°
High of Setup Fixed detection range Detection angle
Function
1. Detection range: fixed detection range up to 35 feet when it is mounted 8-10’ high from
ground
2. Delay time: Adjustable from 5s-8min (rotate clockwise to extend delay time).
3. Delay time with auto delay extension: When motion detection is triggered multiple times under pre-set
delay time period, it can be automatically reset to extent until motion is no longer detected. User Tips: Set
the shortest delay time for walking test.
4. Light up control (LUX setting): Adjustable from 10 lux to 2000 lux (from Dark to Daylight condition) when
pre-set the brightness level based on different environment.