FAQ

12346 Valley Blvd, Suite A El Monte California U.S.A. 91732
Office: 626-579-3889 www.eleding.com Email: [e-mail] Page 2 of 3
is built with full compatibility and capability.
Q5: What sizes are available for eSenlite LED panel lights?
Answer: eSenlite LED panel lights come in the universal standard panel light sizes, suitable for both new
lighting projects and the replacement of existing outdated 1x4ft, 2x2ft, or 2x4ft fluorescent panel lights. There
are three sizes available:
 35W, 4550 Lumens for 1ft x 4ft panels
 35W, 4550 Lumens for 2ft x 2ft panels
 50W, 6500 Lumens for 2ft x 4ft panels
They are all with a height of 1.4”. Each box includes 2 pieces of LED panels, accompanied by a complimentary
handheld remote control. In the case of combo orders, the number of free handheld remote controllers or
wall-mount switch is adjustable based on the order quantity.
Q6: Are the eSenlite LED panel lights easy to install?
Answer: Absolutely! If you have standard T-bar ceilings, you can simply drop this ultra-light panel onto the lay-in T-bar ceiling.
It's also easy to recess the panel while replacing old fixtures or for new construction projects. Furthermore, our lights are ideal
for surface mounting and wall decorations, as well as A.D. post lighting and hanging lighting. We provide surface mount frames
and hanging kits to accommodate various installation needs, which you can find among our available accessories.
Q7: Do you offer frame or chain accessory kits for this panel light?
Answer: Yes, eSenlite LED panel lights come with a range of accessories. We provide aluminum Surface Mount Frames in three
sizes: 2x4ft, 2x2ft, and 1x4ft. These frames have a thickness of 2 inches and are designed for surface structures like drywall.
Our hanging kit is versatile and can be used with or without the optional aluminum surface mounting frame. It's compatible
with various light panels, making it a suitable choice for different setups.
Q8: How do I set it up before using it?
Answer: To begin, switch off the wall hardwired switch or circuit breaker. Next, press and hold the ID button on the handheld
remote until a small RED LED indicator starts flashing on top of the remote. Afterward, turn on the wall hardwired switch or
circuit breaker. Once you observe the panel light(s) flashing, you can release the ID button. This process completes the setup.
Please refer to our videos for setting for handheld remote and wall-mount switch at www.eleding.com or
https://www.youtube.com/watch?v=687nD7XGDNo . If you encounter any difficulties or if there are any unclear settings,
please don't hesitate to reach out to EESGI. You can contact us via phone at [phone] or email us at [e-mail].
Our Customer Service Hours are from Monday to Friday, 10 AM - 5 PM PST. We are here to assist you.
Q9: What voltage is required for this eSenlite LED panel light?
Answer: It operates within a wide voltage range: 110-227VAC/50-60Hz, making it compatible with AC power sources
worldwide.
Q10: What are the benefits of having the 2 remote controllers? What options do I have to choose from?
Which one is offered for free?
 EEBPTL-RC-H, Handheld 2.4G RF Combined Dimmer, CCT Selector, and ON-OFF with up to 4 Grouping Tri-Function
Controller for LED Panel Lights EEBPTL Series: This remote is ideal for adjusting brightness during activities such as
sharing videos or PowerPoint presentations in conference rooms or classrooms. It features a maximum of 4 group