Instructions / Assembly


Page 8 
Safety Notes:
1. Ensure the LED light size should be approximately equal with the mounted skeleton of ceiling
tile size, otherwise it is not safely set up or it can be easily fall off
2．Ensure the skeleton can bear the weight of LED light before installation
3．Switch the AC power OFF before installing
4．Must be connect the grounding wire with light fixture and insulated when connect wires, to
prevent circuit breaker or electric shock fuse, copper wire cannot be exposed
5．Place the power supply at a reasonable and safe position for convenient change or
maintain; in order to avoid affecting ventilation and radiating and prevent fire, there shouldn’t be
any items within 50mm around power pack, especially flash point below 80-degree items;
6．This product is built as indoor light fixture, no waterproof certification. Forbid using outdoor or
higher moist environmental
7．This product has dimming function, can be used with general standard dimmer (as option) or
provided 2.4G remote control
8．Store products in cool, dry and clean environment if unused for long time
9．Highly recommended having professional/licensed contractor/tech to install/setup and
maintain, otherwise, could be unsafe and/or caused the damage