Installation Guide

2.4G Wireless Dimming & CCT Adjustable LED Panel
THE HANDHELD REMOTE CONTROLLER
* After turned on, the light will automatically detect the 0-10v dimmer setting to determine the brightness.
It will default to 100% brightness if there is no dimmer input.
* If the dimmer is used, the light brightness will convert to 0-10v dimmer’s current brightness setting.
* If the remote controller is used, the light brightness will only change from its current brightness.
Turn on
Matching code for light
Release the code and disconnect light from remote controller
Group selecting button
Turn-off delay
Long pressing the ‘ID’ button will keep the controller’s indicator on, then turn
on the light and release the ‘ID’ button after the light flashes, matching code
complete. Matching code for several lights simultaneously is available.
Grouping lights (matching code process needs to be completed first). Turn
off the lights, continue pressing the group selection button for 3s, then turn
on the lights, the lights will flash to finish grouping.
After selecting the color temperature, press the button “OFF” then turn on the light to save the
color temperature.
5000K
4000K
3500K
25% brightness
Increase brightness Decrease color temperature
Increase color temperatureDecrease brightness
50% brightness
75% brightness
100% brightness
3000K
All Groups are selected
Color temperature selecting/saving
Turn off
ON
ON
+
Press the botton together, then turn on the light, the light will
flash to finish releasing the code on the lights.
+
Press the button, the delay function will begin after the light flashes
once. The light will be turned off after 10s. Pressing the ‘ON’ button will cancel
the delay function.