eSenlite Model: EEBPTL2450W-RC, (option: EEBPTL2235W-RC; EEBPTL1435W-RC) Product Name： LED Drop Ceiling Flat Panel Troffer Light (dimmable, color selectable) Product model： Specifications: Version number： EEBPTL2450W-RC (EEBPTL2235W-RC; EEBPTL1435W-RC) 100-277VAC，50/60Hz Ver 1.1-102021 Contact information: info@eesgi.
Product Introduction 1． Overview： LED Drop Ceiling Flat Backlit Panel Troffer Light is a kind of top-grade interior lighting products which is composed by a multiple of high-performance 3 rd generation LEDs. Well-built innovative structure, side view emitting, high transmittance LGP, illumination uniformity and soft light that relieve eye fatigue. No radiation, it does not irritate the pregnant women, elderly and children's skin.
Photoelectric Parameter: EEBPTL2450W-RC (EEBPTL2235W-RC; EEBPTL1435W-RC), Data by 25C temp Parameter Electricity Parameter Light Parameter Symbol Min. Value Typical Value Max Value Unit Input Volt Vin AC100~277 V Input Current Iin 198~550, (140-385) mA Input Frequency F 50/60 Hz Power Load P 50, (35W) W PF Pf >0.
Quality Guarantee Beam Angle θ 120, (130) ° Lux E Lifespan T 50,000 Hrs. Warranty T 5 Years 235Lux/1 ft, Instructure and Packaging 1. Dimension: 2’/24”x4’/48”x1.4” (or 1’/12”x4’/48”x1.4”; 2’/24”x2’/24”x1.4” option) 2．Packaging data (EEBPTL2450W-RC only): Parameter Value Unit Parameter Value Unit Unit Size 48x12x1.4 INCH Carton Size 50x25.5x4 INCH N.W 7.3 LB/PC Quantity 2 PCS G.W 8.4 LB/CTN Total W.
3．Application Reference： Installation Instruction 1.
②．Connect AC power，refer 2 2 ③．Put the light panel back on top of ceiling, refer 3 3 Page 5
④． Finish and double check if secure and safe, refer 4. 4 ⑤．Turn on the power to light up the light panel with normally function, refer 5 5 2. Suspension Mount (option), refer 6. 7. 6. 7.
1.Make sure that the ceiling can hold the weight of the LED panel and install ceiling brackets suitable to support the weight of the LED panel. Fixing cables. 2.Gather panel and connect the wires as shown in “Assembling panel”. 3.Attach the suspended cables to the bends at the edges of the LED flat panel. 4.Turn on the main power. Installation is completed. 3. Surface Mount (option) 1. Put the pieces of frame to any horizontal surface. 2.
Safety Notes: 1.
