Installation Guide

Suspension Mount
2.4G Wireless Dimming & CCT Tunable LED Panel
Surface Mount
2.4G Wireless Dimming & CCT Tunable LED Panel
Recessed Mount
2.4G Wireless Dimming & CCT Tunable LED Panel
Ceiling
Ceiling
CeilingCeiling
Ceiling Ceiling
1. Prior to installation, make sure the drop ceiling frame can support the weight of the LED panel. Then connect
the LED Panel Light to power to verify it operates. Plan to rotate the panel into a vertical diagonal position for
installation into the drop ceiling frame.
2. Firmly secure the LED Panel Light's Internal Power Driver in place and insert the LED Panel Light above the
drop ceiling. be sure the front of the panel is facing the ground.
3. Rotate the LED Panel Light (45° in the horizontal direction) to align the edge of the LED Panel Light to the drop
ceiling frame.
4. Rotate the LED Panel Light (90° in the vertical direction) to align it with the recessed drop ceiling frame and to
align the LED Panel Light radiating face towards the ground.
5. Embed the LED Panel Light into ceiling and adjust its position to align as flat as surrounding ceiling tiles.
6. Turn power ON and verify operation. Installation complete.
1. Setup the suspension wire connector and holder on the ceiling, make sure been safe!
Stuffed in the
expansion screw cap
Suspension wire holder
Set with the screw
Drill a hole with 6mm
diameter drill bit
Ceiling
Adjust the length of suspension wire
Rotary fixing
Suspension wire
3. Hanger the LED panel light by the hook of suspension steel wire
LED driver box
LED panel light
2. Connect the suspension steel wire on the ceiling completely and safely
1. Parts A1,A2, B1,B2;
2. First must be assembled well A1, A2, and B1 (as illustrated)
3. As is shown in the figure A1 and A2 mount it with #8 screws with nylon swelling cap on the ceiling or on the wall, and then
siding insert the panel light directly into the aluminum frame
4. Cover B2, to finish installation.
* Dimming and Color adjusted via RF Remote Control
* 2
* 2
(A1/A2)
(B1/B2)
(A1)
Ceiling
(A2)
Ceiling
(B2)
(A2)
Ceiling
LED PLANT LIGHT
1
2
3
4
(B1)
LED panel light
(A1)
(A2)
(B1)
Option 1: Apply with RF wireless dimming CCT control All-In-One function
(Default and recommended)
Option 2: Apply with hard wire 0-10V dimming function
L out
N/C N/CN/C N/C
GNDGND
GND
GND
N/C N/C
We appreciate your business!
How'd we do?
Please take a moment to let us know. We will provide a FREE wall mount remote controller (mode #
EEFPTL-RC-W) if you can register on our website: www.eleding.com and leave us your positive feedback
at Home Depot.com. Please contact us via [e-mail] to get the FREE remote!
We use your feedback to improve our operations for you and customers like you.
Thanks!
EE Systems Group Inc. www.eleding.com , [e-mail]. 1-877-579-3889 (M-F, 10am-5pm PST), v042021
EE Systems Group Inc. www.eleding.com , [e-mail]. 1-877-579-3889 (M-F, 10am-5pm PST), v042021
EE Systems Group Inc. www.eleding.com , [e-mail]. 1-877-579-3889 (M-F, 10am-5pm PST), v042021