User`s guide

chapter 1 / Basic network features of NOD32 for Windows

Model installation of Mirror

as an HTTP server

1. In the NOD32 Control Center choose Mirror and on the

right, click on the Setup button.

2. Check Create update and also Enable access to les

to perform program component upgrade. In the up-

per part, choose those versions of NOD32, for which

updates will be downloaded from the Internet. All

versions that will be running on the workstati-

ons should be checked. Into the dialog box Upda-

te mirror folder, enter a path to the folder, where the

update les will be downloaded and later presen-

ted by the HTTP server. For example the path can be

C:\ OD32LAN.

3. Click OK to save your settings.

4. In order not to wait for the next automatic update (and

thus for the folder C:\NOD32LAN to be lled in), click on

the Update now button in the Update dialog window.

Now server setup is completed. We will proceed to the

workstations.

5. For NOD32 on workstations, just change the update

server URL. In most cases it means from Choose auto-

matically to http:// IP_address_of_my_server:8081.

This is done in NOD32 Control Center: click on the

Update button, and then choose Setup.

6. When there, click on the Servers button and add

a new server, namely http:/ /IP_address_of_my_ser-

ver:8081. Save the changes by clicking OK and set this

server in the previous dialog window.

Now the conguration of workstations is comple-

ted too.

Now click on the Update now button in the Update tab

to check whether it is set up correctly.

Model installation of Mirror

as a shared folder

The whole process of installation is similar to the pre-

vious case. Some dierences can be found in the steps 2,

5, and 6, the others are identical.

• Step 2:

Check the Create update mirror checkbox. In the up-

per part choose those versions of NOD32, for which upda-

tes will be downloaded from the Internet. All versions

that will be running on the workstations should be