Installation manual

8.3.3 How to enable and configure the Mirror

If the Mirror is directly integrated into ERA (a Business Edition component), connect to ERAS using ERAC and follow these

steps:

From the ERAC click Tools > Server Options… > Updates.

From the Update server: drop-down menu, select Choose Automatically (updates will be downloaded from ESET’s

servers), or enter the URL/UNC path to a Mirror server.

Set the Update interval for updates (we recommend sixty minutes).

If you selected Choose Automatically in the previous step, insert the username (Update username) and password

(Update password) which were sent after purchase. If accessing an upper server, enter a valid domainuser name and

password for that server.

Select the Create update mirror option and enter a path to the folder which will store the update files. By default this is

a relative path to the Mirror folder, as long as the option Provide update files via internal HTTP server is selected and

is available on the HTTP port defined in HTTP server port (by default 2221). Set Authentication to NONE (For more

information see chapter Operation of the Mirror server ).

NOTE: In case of problems with updates, select the Clear Update Cache option to flush the folder in which temporary

update files are stored.

The Mirror Downloaded PCU option allows you to activate mirroring of program components. To set up PCU mirroring

go to Advanced > Edit Advanced Settings and configure settings in ESET Remote Administrator > ERA Server >

Setup > Mirror (or Mirror for NOD32 version 2).

Select the language components to be downloaded in Advanced > Edit Advanced Settings… the branch ERA Server >

Setup > Mirror > Create Mirror for the selected program components. Components for all language versions to be

used in the network should be selected. Note that downloading a language version not installed in the network will

unnecessarily increase network traffic.