EP01T Wireless Presentation System The user manual
ESHARE TECHNOLOGY CO., LIMITED About this manual The products described in this manual are for sale and use in mainland China only. This manual is used as a guide. The photos, graphics, charts and illustrations provided in the manual, For the purpose of explanation and explanation only, there may be differences with the specific product, please refer to the actual product.
roduct introduction Wireless Presentation System can realize automatic wireless screen projection, mirror screen projection, bidirectional control and other intelligent office meeting functions in a variety of platforms.
I、 Use with meeting tablet 1. Scheme 1: use wireless projector Meeting flat end pairing Connect the wireless projector to the USB port of the conference panel and wait for the device to pair automatically. The indicator light will change from the flashing state to the long-bright state, which means the match is successful. After success, the main interface of the projection screen prompts that the pairing is successful, then pull out the wireless projector.
Step 2 open the projection screen LED indication aperture flashing: indicates that the wireless transmitter is looking for the receiver; LED indicates long and bright aperture: it indicates that the Wireless Presentation System is in the ready state and can transmit the screen at any time;At this time, press the Wireless Presentation System button to achieve the screen function. Figure 4.
Open the wireless hotspot of the conference tablet and record the wireless hotspot name and password Open WIFI on Android device and search for WIFI hotspot ShareAP*** (" ShareAP-*** "depends on the hotspot name of the actual device) Enter the account password of WIFI hotspot, the default password is 12345678 Open the downloaded APP, and the device number will be displayed at the top of the page, which represents the successful connection.
II、 Use method of matching display device 1) Displays device side connections The first step is to connect the display device (projector, monitor) to the receiving box Plug one end of the HDMI connector into the display device (projector, monitor) and the other end into the HDMI connector in the receiving box FIG. 5 wiring diagram of receiving box and display equipment Step 2 boot the receiver box Long press the power on key of the receiving box for 3 seconds to start the machine.
After success, the main interface of the projection screen prompts that the pairing is successful, then pull out the wireless projector. If the match is not successful, please contact our after-sales service for assistance. Note: the device only needs to be paired once. If there is no change later, there is no need to re-pair. 2) PC matching Equipment support Windows 7 system and above and Apple Mac OSX 10.9 system above.
If the system prompts for permission or antivirus software, please choose to agree. Step 2 open the projection screen LED indication aperture flashing: indicates that the wireless transmitter is looking for the receiver; LED indicates long and bright aperture: it indicates that the Wireless Presentation System is in the ready state and can transmit the screen at any time;At this time, press the Wireless Presentation System button to achieve the screen function.
III、 Product parameters 1. Wireless projector parameters Configuration installation configuration free, automatic connection, automatic operation Power/power consumption 5V, 0.5w ~2W Interface HDMI + USB device Support Windows 7/8/10, IOS 8.0, android 2.3 or above Resolution 1080 p The frame rate of 25 ~ 30 FPS Transmission delay < 200 ms Touch return support 10 point touch return (Windows, Mac) Support mouse mode return (Windows, Mac) WIFI type 2.
Infrared support HDMI output Supports 720P/1080P/2K/4K resolution Support ratio 4:3, 16:9 (special ratio can be manually matched) WIFI type 2.4g /5G dual-frequency WIFI, The wireless rate is >, 200 Mbps*2 Wireless transmission protocol IEEE 802.11a /g/n/ac WIFI working mode STA and AP work simultaneously Encryption AES Verify protocol wpa2-psk Audio/video Video decoding Support h. 263, h. 264, h.
Restricted substance or element identification table "Administrative measures for the restricted use of harmful substances in Administrative measures for the limitation of harmful substances in electrical and electronic products to restrict substances or elements Part of the name Ⅵ hexava lent chromi um (Cr) Polybromi nated biphenyls (PBB) Polybrominat ed diphenyl ether (PBDE) Lea d (Pb) Mer cury (Hg) Cad miu m (Cd) Metal parts x Ο Ο Ο Ο Ο Plastic parts O Ο Ο Ο Ο Ο The glass parts x Ο
electrical and electronic products This product should not be discarded at will after it has expired or failed to work properly after maintenance. Please refer to the national or local regulations on disposal of waste electrical and electronic products for the correct method.
The warranty service Dear users: Thank you for choosing this product. In order to fully enjoy the perfect after-sales service support, please read the instructions of this product warranty card carefully after purchase and keep it properly. 1. With this card to enjoy the warranty period of free warranty and warranty period of preferential services. 2. Free replacement period of 7 days from the date of purchase due to quality problems, and the warranty period of 2 years. 3.
20C