Installation Guide

6
4. To ensure better lighting, please clean the lights at regular
intervals.
Before you clean the LED lights ensure that the power is off.
Absolutely avoid when cleaning the lights wearing metallic or
conductive jewelry such as bracelets, necklaces, rings etc.
A soft dry cloth is recommended for cleaning.
Please do not install the LED lights close to heat sources or on
open fires.
5. With the 12W 12V DC power supply included in the kit, you can
use additional LED bars or puck light based on the information
below:
7" bar - 2W+/-10%
12" bar - 3W+/-10%
20" bar - 5W+/-10%
40" bar - 10W+/-10%
Puck light - 2W+/-10%
The power supply can handle MAX 12W load.
Power supply comes with the 4.9ft cord.
Connector specification: 3.5mm (Outer Diameter) x 1.35mm (Inner
Diameter).
IMPORTANT: Never overload power supply. Before purchase please
make sure you have 12V DC compatible LED bars.