Item Brochure

ManualsBrandsESI ManualsMedical Supplies & EquipmentBeneFIT Series Premium Electric Adjustable Table Base for 90° Corner Work Surfaces - Silver Finish

Premium

Electric

Value

Electric

Easy Value

The Value Electric base boasts

adjustable crossbars for easy

installation and modification.

Available Upgrades

• Digital Controller with

programmable memory settings.

• Mobile Foot with integrated rollers

Premium Performance

Exceptional height range, smooth and quiet operation, concealed

crossbar design. Meets the stringent BIFMA G1-2002 and HFES 100-2007

specifications*

Available Upgrades

• Digital Controller with three

programmable memory

settings.

• Set of casters for mobile

conversion

Premium Electric Base Features

Available in 2-Leg and 3-Leg configurations

Concealed crossbar provides exceptional clearance

3-leg bases available in 90º and 120º configurations

Height Range: 22” - 48”

Total Travel Range: 26”

Lifting Capacity: 2-Leg: 220 lbs. / 3-Leg: 300 lbs.

C-Leg configuration

Speed of Adjustment: 1.5”/second

Control pad features up/down switch

Standard finish is silver

Meets BIFMA and HFES 22” lowest height

adjustment

Rated Voltage: 120V, 60hz

Max Power Consumption: 10 Amps

Rated Power: 200 W

Standby Power: < 0.3 W

Equipped with overload protection

UL/cUL listed

Value Electric Base Features

Available in 2-Leg configurations only

Adjustable crossbar can be adjusted in the field

Concealed crossbar provides exceptional clearance

Height Range: 24.5” - 50.2”

Total Travel Range: 25.7”

Lifting Capacity: 220 lbs.

T-Leg configuration

Speed of adjustment: 1.42” per sec

Control pad features up/down switch

Available in silver finish only

Rated Voltage: 120V, 60hz

Standby Power: < 0.4 W

Equipped with overload protection

cTUVus certified

BIFMA & HFES*

MEETS THE STANDARDS OF

Adjustable Tables

Whether you need a Crank, Pneumatic or Electric Base, ESI

can provide adjustable table bases to fit most work surface

shapes, sizes and budgets.

*BIFMA and HFES require the keyboard support to be set to 22” from the keyboard surface to the floor to satisfy the requirements for the 5th percentile of females seated and 28.5” to satisfy the requirements for the 95th percentile of males standing.

Customer Service: 800.833.3746 | esiergo.com

Adjustable Tables

Summary of content (6 pages)

PAGE 1
Adjustable Tables Whether you need a Crank, Pneumatic or Electric Base, ESI can provide adjustable table bases to fit most work surface shapes, sizes and budgets. MEETS THE STANDARDS OF BIFMA & HFES* Premium Electric Premium Performance Exceptional height range, smooth and quiet operation, concealed crossbar design.
PAGE 2
X-Base X-tra Flexibility The X-Base series offers both stationary and mobile options for virtually any environment. • • Pneumatic height adjustment Available in two base sizes and compatible with round or square work surfaces X-Base Features Single Post X-Base configuration Lifting Capacity: 0 ‑ 50 lbs.
PAGE 3
Tables Bases W Use the Information below to locate the work surface shape and dimension. Continue across the chart to determine the appropriate table base that should be used. For Rectangle & Peninsula Work Surfaces D C-Leg Base Premium Electric Pneumatic Crank Choose from these 2-leg bases for tables with Rectangular work surfaces.
PAGE 4
For 90º Corner Work Surfaces Choose from these bases for 3-leg tables with a 90º angle. This includes Large 90º Equal Corners and 90º Offset Corner Left and Offset Corner Right work surfaces.
PAGE 5
Adjustable Table Accessories Adjustable Table Table Base Type Keyboard Solutions Less than 30” Depth More than 30” Depth Premium Electric The location of the crossbar under the work surface is important when choosing an arm and keyboard platform. The table to the right shows the proper keyboard solution according to the type of base and crossbar configuration.
PAGE 6
Ordering Work Surfaces Laminate Colors Standard laminates ship with matching 3MM edgebanding. Please indicate laminate choice by adding the 2-letter code at the end of the Work surface Part Number. For example to order a work surface with Designer White: 2R3624DW Non-standard laminate colors are available for an up charge. May not be available with matching 3MM edgeband. Call for pricing.