User`s guide

User’s Guide User programming: An introduction
C.1
User programming: An introduction
Voice prompts will play menu and sub-menu options to access the desired feature. You don't have to wait for the
entire prompt to be played. Therefore, once you’ve become familiar with the prompts (consult “User
programming menu” on the next page), you can quickly set any frequently used feature.
Programming help
During any of the programming steps, press PROG/HELP to hear a more detailed description of the feature
and related programming options.
Exiting programming mode
To exit programming mode, simply hang up.
User programming menu
Overview
1 Select personal greeting
1 Record
2 Delete
3 Hear
2 Programmable feature keys
(Station keys, line keys, speed-dial keys, other feature keys)
3 Station options
1 Call waiting/background announce
2 Personal greeting reminder
4 Outside dial tone preference
5 Hands-free answer
6 Message monitor
7 Power-saving mode
1
4 Station audibles
1 Station ring tone
2 Station ring volume
3 Message ring
5 Password
1 Enter
2 Delete
3 Play back
4 Security level
6 External message notification
1 Delivery options
2 Phone delivery
3 Pager notification
4 Urgent message
6 Twinning programming
1 Enable/disable
2 Select destination
7 Personal Call Routing
2
1 Entry settings
2 Exit settings
3 Quiet time settings
9 Un-delete
Note: Selections 3, 5 and 6, as well as the background announce function under “Station options” (see page
E.13), are not available on a legacy 12-Key Feature Phone. In addition, selection 6 6 (twinning
programming) is not available on an ESI Cordless Handset.
1
For use with only ESI Cordless Handsets.
2
Available only if your system is using ESI Presence Management. If you’re not sure whether it is, consult your System Administrator. For more
information about ESI Presence Management, visit www.esi-estech.com/presence.