User`s guide

ESI-50L Programming Manual Function 2: CO lines

C.3

Function 16: System feature parameters

Function 162: Connect tone

This sets whether the system plays a system connect tone (two short beeps a user hears when a station answers).

Default: Enabled (the beep plays).

Function 163: Station feature set activation

Field 1: Group listen

With this feature disabled: if a station user presses SPEAKER while on a call, the Feature Phone

immediately turns off the handset and switches to hands-free mode.

If enabled, the group listen feature is available system-wide. If disabled, it is no longer available.

Default: Disabled.

Field 2: Privacy release

With this feature enabled: if a station user presses a CO line key that is in use (lit red), the user will be

immediately conferenced with the call in progress on that line. With this feature disabled, pressing an in-use

CO line key has no effect.

Default: Disabled.

Warning: Adjusting this parameter while calls are in progress may result in temporary loss of audio.

Field 4: VIP text-messaging enable/disable

With this feature enabled, VIP Professional and VIP PC Attendant Console users can use VIP

to text-message.

Default: Enabled.

Function 17: System speed-dial

Up to 100 system speed-dial names and associated numbers can be stored, in location numbers

600–699, for access by any station. A user can initiate a system speed-dial by dialing the speed-dial location

number or by accessing the name through the Esi-Dex feature. In Function 32, access to system speed-dial can

be denied to individual stations (see page D.3).

Note: System speed-dialing overrides toll restrictions (Function 32, page D.3).

1. Enter the three-digit location number to program,

2. Enter a ten-character name (see “Entering alphanumeric characters,” page B.2).

Note: You must enter a name to continue.

3. Enter the number to be dialed (including the line group 9, 8, or 71–76). Press the left scroll key (



) to

delete any character or digit entered in error. Here’s an example:

Speed-dial #

Name

Number

601 AUTO RENTL 915552221212

The number dialed in Step 3 can be up to 30 digits long including special characters:

Code What it produces

# # DTMF tone