Installation manual

ESI Communications Servers Hardware Installation Manual Overview
A.1
Overview
Cabinet components
ESI-1000, ESI-600, and ESI-200
Cabinet components
1
for the ESI-1000, ESI-600, and ESI-200 consist of:
• Base Cabinet
– Main board
– Backplane
– Memory Module
– Seven port card slots
– External wall-mounted power supply
• Expansion Cabinet (optional)
– Backplane
– Seven port card slots
– Expansion cable
– Expansion Card
– External wall-mounted power supply
ESI-100
The ESI-100’s cabinet components
1
consist of:
• Base Cabinet
– Main board
– Memory Module
– Two port card slots
– External wall-mounted power supply
• Expansion Cabinet (optional)
– Two port card slots
ESI-50
The ESI-50’s cabinet components
1
consist of:
• Base Cabinet
– Main board with built-in 482 and
SL-IVC 12 port cards
– Memory Module
– One port card slot
– External wall-mounted power supply
• Expansion Cabinet (optional)
– Two port card slots
Base Cabinet
The ESI Communications Server Base Cabinet is designed for easy installation and component access.
Regardless of model, each ESI Communications Server Base Cabinet houses the main board, Memory Module,
Network Services Processor (NSP), one multi-purpose serial port, and an MOH connector.
ESI-1000, ESI-600, and ESI-200
The Base Cabinet for the ESI-1000, ESI-600, and ESI-200, which measures 19″ W  10.5″ H  10.5″ D, also
houses the Mirrored Memory Module (M3)
2
and seven port card slots (see “Port card options,” page A.4).
ESI-100
The Base Cabinet for the ESI-100, which measures 8.5″ W  11″ H  3″ D, also houses two port card slots
(see “Port card options,” page A.4).
ESI-50
The Base Cabinet for the ESI-50, which measures 8.5″ W  11″ H  3″ D, has a main board with built-in 482
and IVC 12 port cards. it also houses an additional port card slot (see “Port card options,” page A.4).
1
Memory Modules and port cards are packaged separately and are mounted in each system’s cabinet during installation.
2
The M3 interface is standard on the ESI-1000, optional on the ESI-600 and hard drive-equipped ESI-200. Each requires an optional second
Memory Module.