User`s guide

User’s Guide Special keys
F.9
3. Enter 9 2 5 (W A L). The display will show the first stored name that starts with the character range
from WAJ to YCL.
4. Press the scroll keys (

and

) until XYZ COMPANY appears in the display.
5. Press DIAL. This dials the number for the XYZ Company.
Important: The number dialed (if stored from a Caller ID) will be the number for the actual line used by
the caller, and may be different than the caller’s listed number. Additionally, some local calls
may not be auto-dialed correctly, depending on the limitations of your area’s local dialing
plan. You may wish to create a manual listing for these. Consult your administrator if you
need further assistance.
System speed-dialing with Esi-Dex
If your administrator has programmed system speed-dial numbers, you can access one of these numbers
either via Esi-Dex, as explained in the foregoing discussion, or auto-dial it by dialing its corresponding three-
digit access number (in the range 600–699).
Example: If an out-of-town factory location has been programmed as system speed-dial access number 605, you can
lift the handset, receive internal dial tone, dial 6 0 5 and this will automatically dial the factory’s number.
You may also program 605 (in this example) as a programmable feature key (see page C.2).