User Manual

ManualsBrandsESI ManualsAudio Interfaces & SystemsMaya44 eX 4-In/4-Out PCIe Audio Interface

ESI MAYA44 eX

You will find two output devices, one for output channel 1/2 and the other for output channel 3/4.

Via Properties you can define additional Windows related settings such as the default sample rate.

All other important settings are handled through the MAYA44 eX Control Panel as described in

chapter 6.

8. Specifications

1. Sample Rates

- 32, 44.1, 48, 88.2, 96 kHz recording & playback

2. Analog Input

1) connector type: 4 channel analog inputs

* 1/4" TRS (stereo) jack (line in 1 and 2) common with microphone input

* 1/4" TRS (stereo) jack (line in 3 and 4) common with Hi-Z input

2) peak level: 0dBFS @ +6dBV

3) programmable gain: -48dB ~ +24dB (1dB step size)

4) impedance: 10K Ohm

3. Analog Output

1) connector type: 4 channel analog line outputs

* 1/4" TRS (stereo) jack

2) peak level: +6dBV @ 0dBFS

3) attenuation: -48dB ~ +0dB (1dB step size)

4) impedance: 33 Ohm (line out 1 and 2, headphone out), 33 Ohm

(line out 3 and 4, headphone out)

4. Microphone Preamp

1) mic preamp gain: +21dB

2) peak level: 0dBFS @ 246mV

3) +48V phantom power supply

4) impedance: 3.3K Ohm

5. Hi-Z / Guitar Input

1) impedance: min. 330K Ohm

6. Headphone Amplifier

1) load impedance range: 32-300 Ohm (for best performance)

2) output power: 125mW @ 32 Ohm per channel

1. Sample Rates

1) 32, 44.1, 48, 96 kHz input and output

2. A/D Converter

1) SNR: 102dBA (0dB @ fs=48kHz)

2) dynamic range: 102dBA

3) THD: -95dB (1kHz, -1dBFS)

4) interchannel isolation: 90dB

3. D/A Converter

1) SNR: 108dBA (0dB @ fs=48kHz)

2) dynamic range: 108dBA

3) THD: -97dB(1kHz, 0dBFS)

4) interchannel isolation: 100dB

4. Digital Input

1) connector type: optical TOSlink

2) format: IEC-60958 Consumer (S/PDIF)

3) resolution: 24-Bit