User Manual

ESI MAYA44 eX
9
To confirm the completion of the installation after rebooting the system, please check if the orange
color ESI icon is displayed in the taskbar notification area as shown below.
If yes, the driver installation has been completed successfully.
5. Connecting External Devices
5.1 MAYA44 eX Line Connectors
The line input and line output connectors of MAYA44 eX are unbalanced stereo, using a 1/4" TRS
connection. This means that in order to have separate stereo connectors, you might need to use a
special cable that is shown on the following picture. It converts one stereo (seen on the left) 1/4"
jack with two mono (typically left/white and right/red) 1/4" jacks for the separate mono signals.
The tip of the stereo TRS connector is connected with the tip of the left TS connector. The ring of
the stereo TRS connector is connected with the tip of the right TS connector. The sleeve is
connected with sleeve / ground of both channel connectors.
The same type of cables are typically used as so-called ‘insert-cables’ to connect effects units to
many mixing consoles. This information might help you when you want to make or purchase such a
cable.