User`s guide

ESI ESP1010e
7
When holding the ESP1010e card, touch only the guide or the edge of card. Do not grab the card by
the board or connector.
3.2 PCIe Card Installation
Find an empty PCIe slot on the motherboard. If you are unsure, please check the manual of your
mainboard or computer to identify the PCIe slot, or consult a computer specialist. There are
different types of PCIe slot, ESP1010e will work in shorter PCIe x1 and in longer PCIe x4 and PCIe
x16 slots, however not in old standard PCI slots.
Typical PC Motherboard Slot Configuration
If a faceplate or cover is behind the PCIe slot, you can remove it by removing the screw holding it
in place or by prying it off with a screwdriver.
Removing the slot faceplate
Insert the ESP1010e card into the PCIe slot, firmly pushing the card into the slot until it is seated
securely. Replace the screw, and tighten.