Installation manual

IVX 20 Function 1: System parameters
D.3
Function 17: System speed dial
Up to 100 system speed dial names and associated numbers can be stored, in location numbers
600–699, for access by any station. A user can initiate a system speed dial by dialing the speed
dial location number or by accessing the name through Esi-Dex’s System Dex feature. In Function
32, access to system speed dial can be denied to individual stations (see page F.5).
Below is an example of a completed programming worksheet for system speed dial:
1. 2. 3.
LOCATION NO. NAME NUMBER
601 CAR RENTAL 912145551212
The programming steps are:
1.
Enter the 3-digit location number to program,
2.
Enter a ten-character name (see “Entering alphanumeric characters,” page C.2).
3.
Enter the number to be dialed (including the line group 9, 8, or 7). Press the left scroll key (▼)
to delete any character or digit entered in error.
The number dialed in step 3 can be up to 30 digits long including the following special codes:
Code What it produces
# # DTMF tone
* * DTMF tone
F Flash hook
P 2-second pause
To insert a special code, press the right scroll key (▲) to select the desired special code: # , * , F or
P. Press # to confirm the inserted character and continue.
Press # # to complete the entry.
Example: To create a System Speed Dial number that dials 9, then 972-555-5644, then
pauses for 4 seconds and finally dials #104, enter:
9 9 7 2 5 5 5 5 6 4 4 (scroll to) P # (scroll to) P # (scroll to) “#” # 1 0 4 #
Deleting a speed dial number
To delete an entire speed dial number and name, delete the location number (6 X X) by pressing
HOLD during step 1 in the speed-dialing procedure described above. .