Installation manual

IVX C-Class with voice mail: Installation Manual Function 5: Voice mail programming
H.5
Cascade paging parameters
The cascade paging mailboxes will use the same CO line group and pager-dialing pause as
programmed in Function 552 (see page H.3).
Paging interval
To program the paging interval parameter for a cascade paging mailbox:
1. Enter the mailbox number (520–529).
2. Press 2 to set parameters for the mailbox.
3. Enter the number of minutes for the interval between attempts.
Range: 10–1440. Default: 0))
Note: Once you change this setting from 0, you cannot reset it to 0.