User`s guide

ESI nEar04
5. power port with ext. fuse – use this connector to plug in the detachable 3-circuit line cord that
connects to the power outlet.
6. AC selection – you can select either 110V or 230V AC power according to your local
requirements. Make sure this is selected properly before you switch on nEar04 for the first time or
your equipment could be damaged.
Front Panel / Side View
volume control knob – use the volume control to set the proper output level of nEar04. Please be
careful and never set the volume too high as it could damage your equipment otherwise.
power indicator – the LED on the front shows if nEar04 is switched on or not.
Notice: The above picture shows the front panel of the left speaker. The right speaker does not have
a volume control know and power indicator LED.
5. General Information
Trademarks
ESI, nEar and nEar04 are trademarks of Ego Systems Inc. and ESI Audiotechnik GmbH. Other
product and brand names are trademarks or registered trademarks of their respective companies.
9