User`s guide

ESI nEar08 classic
8
5. volume control knob – use the volume control knob to set the proper input level from the sound
source. Make sure to setup the left / right speakers accordingly.
6. high frequency level selection – this rotary switch allows you to change the level of the high
frequencies in the signal to control room dumping in the range -2 to +1 dB in 1dB steps. Depending
to your specific listening environment whether they require such a change, you can adjust it here.
The recommended default is the 0dB setting.
7. low frequency boost selection – this rotary switch allows you to change the level of the low
frequencies in the signal great for tuning the nEar08 if you are using a separate subwoofer like the
ESI SW10K eXperience.
8. power switch – when you push the power switch, nEar08 classic will be turned on, and
–surprise– it will be turned off when you push the power switch again.
9. power port with ext. fuse – use this connector to plug in the detachable 3-circuit line cord that
connects to the power outlet. The connector also contains the mains fuse for protection.
5. General Information
Trademarks
ESI, nEar, nEar08, nEar08 classic and SW10K eXperience are trademarks of EGOSYS, Inc. and
ESI Audiotechnik GmbH. Other product and brand names are trademarks or registered trademarks
of their respective companies.
Correspondence
For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at
www.esi-audio.com
.
Disclaimer
All features and specifications subject to change without notice.
Parts of this manual are continually being updated. Please check our web site www.esi-audio.com
occasionally for the most recent update information.
Declaration of Conformity (for the European Union)
The product described in this manual is manufactured in China by ESI Audiotechnik GmbH,
Brennerstraße 48, D-71229 Leonberg, Germany. The product is labelled with the CE mark and
conform to the protection requirements of the European Electromagnetic Compatibility Standards
and Directives. The product is designed and constructed such that electromagnetic disturbances
generated do not exceed levels allowing radio and telecommunications equipment and other
equipment to operate as intended, and, the product has an adequate level of intrinsic immunity to
electromagnetic disturbance to enable operation as specified and intended.
The product is marketed as ESI nEar08 classic studio monitoring speaker.