User`s guide

ESI nEar08 eXperience
Rear Panel
1. XLR input – this connector accepts balanc
like this:
ed XLR input connections. The XLR input is wired
INPUT SIGNAL XLR CONNECTIONS
+ PIN 2
- PIN 3
Shield PIN 1
2. TRS input – this jack accepts TRS input connections, either balanced or unbalanced. For
balanced connections, a 3-conductor TRS plug is necessary. The TRS input is wired like this:
INPUT SIGNAL TRS CONNECTIONS
+ Tip
- Ring
Shield Sleeve
Unbalanced wiring works with either a 2- or 3-conductor TRS connector. A 2-conductor TRS plug
(or sometimes also just called TS plug) automatically grounds the minus signal input, whereas a 3-
conductor TRS plug wired unbalanced provides the option of leaving the minus open or grounded.
We recommend that you ground the unused input.
3. serial number – this label contains the product serial number.
4. vent port –nEar08 eXperience is a vented box speaker system with a vent port on the rear panel.
Make sure you are not blocking the vent port (i.e. by putting the speaker too close to a wall) or the
sound colour will be changed.
7