User`s guide

ESI nEar08 eXperience

trol knob – use the volume control knob to set the proper input level from the sound

source. Make sure to setup the left / right speakers accordingly.

6. high frequency level selection – this rotary switch allows you to change the level of the high

frequencies in the signal to control room dumping in the range -2 to +1 dB in 1dB steps. Depending

to your specific listening environment whether they require such a change, you can adjust it here.

The recommended default is the 0dB setting.

7. low frequency boost selection – this rotary switch allows you to change the level of the low

frequencies in the signal great for tuning the nEar08 if you are using a separate subwoofer like the

ESI SW10K.

8. power switch – when you push the power switch, nEar08 eXperience will be turned on, and

–surprise– it will be turned off when you push the power switch again.

9. power port with ext. fuse – use this connector to plug in the detachable 3-circuit line cord that

connects to the power outlet. The connector also contains the mains fuse for protection.

10. AC selection – you can select either 110V or 230V AC power according to your local

requirements. Make sure this is selected properly before you switch on nEar08 eXperience for the

first time or your equipment could be damaged.

5. General Information

Trademarks

, nEar08, nEar08 eXperience and SW10K are trademarks of Ego Systems Inc. and ESI

Audiotechnik GmbH. Other product and brand names are trademarks or registered trademarks of

their respective companies.

Correspondence

5. volume con

ESI, nEar

For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at

www.esi-audio.com.

Disclaimer

All features and specifications subject to change without notice.

Parts of this manual are continually being updated. Please check our web site www.esi-audio.com

The product described in this manual is manufactured in China by ESI Audiotechnik GmbH,

is labelled with the CE mark and

conform to the protection requirements of the European Electromagnetic Compatibility Standards

occasionally for the most recent update information.

Declaration of Conformity (for the European Union)

Brennerstraße 48, D-71229 Leonberg, Germany. The product

and Directives. The product is designed and constructed such that electromagnetic disturbances

generated do not exceed levels allowing radio and telecommunications equipment and other