SW10K SW10K SW10K SW10K • Professional Reference Sub-Woofer Monitor • User’s Manual www.esi-pro.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents Contents ....................................................................................................................................... 3 Introduction ................................................................................................................................. 4 SW10K Features.......................................................................................................................... 5 1. Subwoofer...........................................................
Introduction Thank you for choosing SW10K, powerful sub-woofer monitor speaker for professional studio applications and higher level home entertainment. ESI has been building excellent reputation for digital interfaces and near Field monitor speaker manufacturer. Now, after long research and development, SW10K is born to change the concept of reference sub-woofer monitoring. SW10K is designed and tested by several audio engineers to meet your needs in studio monitoring environment.
SW10K Features 1. SUBWOOFER Subwoofer unit is 10inch in diameter with mineral filled polypropylene cone with high temperature voice coil and damped rubber surround. It is designed to deliver balanced subwoofer response. Polypropylene is used to react against the input signal accurately and to deliver even minimal input precisely minimizing distortion. 2. ENCLOSURE Enclosure acts as important role as the other components. SW10K enclosure is designed to endure impacts from inside under extreme conditions.
Connection Connect L&R XLR balanced or TRS balanced / unbalanced input of SW10K to the corresponding pre-amp, computer or game console outputs. 2. EXTERIOR FEATURES 1) BALANCE A Connect Male side of XLR Balanced Cables to the balanced inputs and balanced output to left satellite speaker. Connect the Male side of TRS balanced or unbalanced cables to the TRS input of SW10K. Note: Assure that the power switch is turned off and Volume control is to minimum before connecting cable.
Note: Assure that the power switch is turned off and Volume control is to minimum before connecting cable. 3) MUTE CONTROL This connector allows you to connect a expression pedal that you can use to mute the subwoofer sound. This is helpful if you want to make A/B comparison of the sound with and without subwoofer and you can quickly control it with a simple pedal.
6) PHASE SWITCH The purpose of this control is to match the phase of satellite cut off frequency to the phase of the upper frequency limit of the Subwoofer. Adjust the Phase control to make the maximum sound pressure at cross over frequency in order to make sure Subwoofer and Satellites are in phase at cross over frequency. So, you will get maximum sound pressure and most accurate sound quality from the whole system. 7) POWER PART Please only replace with the exactly same type of fuse in the fuse holder.
Connect the Professional Audio Console Subwoofer output to either L or R Input of SW10K through XLR or TRS connector. b. Connect SW10K Left and Right Inputs to Professional Audio Console without Bass Management. Professional Audio Console (Without Base Management) Output-L Output-R Input Input-L Input-R Output-L Input Output-R Satellite-Left Satellite-Right SW10K Connect the Professional Audio Console Left and Right Outputs to SW10K Input-L and Input-R respectively through XLR or TRS connectors.
Technical Specifications - Type: Powered Subwoofer -Subwoofer Driver: 10" black paper cone with high temperature voice coil and damped rubber surround. - Frequency Response: 30Hz - 180Hz, Adjustable 50Hz – 180Hz - Amplifier Power: 100W@100Hz, 4 ohm, 0.
END USER WARRANTY Trademarks ESI and SW10K are trademarks of EGOSYS, Inc. Windows is a trademark of Microsoft Corporation. Apple, Mac, Macintosh are trademarks of Apple Computer, Inc. Other product and brand names are trademarks or registered trademarks of their respective companies. End User Warranty EGOSYS, Inc.
The FCC and CE Regulation Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications in construction of this device with are not expressly approved by the party responsible for compliance, could void the user's authority to operate equipment.
SAFETY INSTRUCTION 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS from the outlet when left unused for a long period of time. 14.
