Quick Start Guide

3.5 Set other commands by SMS
You can set others commands by SMS. Like this: version, mode, factoryreset ect. Please check the
ES82xProtocol.
3.6 Set APN, Report Server IP (AT)
Note: AT command is based on the command in <ES82x protocol>.
The command to re-set server IP is “DATA”. The format of “DATA” is shown below.
Content
Explanation
Command Code
DATA
Separator
,
Parameter3
URL: PORT
End Sign
#
For example:
The reporting server is esky car online platform: www.eskyloacte.com
So the AT command content should be:
Cmd:data, www.eskyloacte.com:1750#
Note: Do not forget the ENTER at the end of command.
The possible response:
①DATA=Success!
It means server IP have changed successfully.
② DATA=Fail!
AT command mark
Cmd:XXXXX
IP:Port