Universal Player OWNER'S MANUAL

Table Of Contents

ENGLISH

Word sync connector

This allows the use of an externally-generated word clock connection, using

a commercially available BNC coaxial cable.

Devices producing such a suitable clock signal include external D-A

converters or dedicated word clock generators. Connect the SYNC OUT (or

WORD OUT) of such a device to the unit.

SIGNAL GND connection

Use a commercially available PVC-covered cord to connect the signal

ground terminal on the unit to the amplifier signal ground.

< Note that this is NOT an electrical safety ground (earth).

Power cord receptacle

After all other connections have been made, insert the supplied AC power

cord into this receptacle, then connect the other end of the power cord into

the wall socket. Ensure that your AC voltage corresponds to the voltage

marked on the rear panel of the unit. Consult a qualified electrician if you

are in doubt.

In order to avoid the risk of electric shock, fire, and so on, only use the

supplied power cord.

< If you are not going to use the unit for some time, disconnect the power

cord from the wall socket.

TRIGGER IN

Use this jack to turn on or off the DV-60 using a external device.

Do not connect a cable when not in use.

REMOTE CONTROL IN

Control terminal for use by custom installers.

When a cable is connected to this jack, the provided remote control unit

RC-1088 will not work.

RS-232C

Control terminal for use by custom installers.