Universal Player OWNER'S MANUAL

Table Of Contents
32
Settings (Audio)
Group playback mode (DVD audio)
[AUDIO q Group Playback]
Continue
Plays all groups. Moving between groups is not possible when
the menu screen is displayed.
Single
Plays the group selected using the menu. Fast forward, track
skip, etc. cannot be used to move between groups.
Downmix
[AUDIO q 2ch Down Mix]
Lo/Ro
Usual stereo mode. Use this for stereo playback, etc.
Lt/Rt
This mode is useful when recording multi-channel sound on a
cassette tape deck or CD recorder connected via the AUDIO
OUT jacks. With a Dolby Pro Logic decoder, the recorded
sound can be decoded into multi-channel sound.
<
To downmix multi-channel sound, set the Analog Out setting
to “2ch”
< Note that this setting is ignored for DVD audio discs and
Super Audio CDs; these are downmixed in the Lo/Ro mode
automatically.
Audio DRC (Dynamic Range Controlling)
[AUDIO q Audio DRC]
ON
Applies dynamic range control to Dolby Digital material,
reducing the volume of loud sounds, and increasing the
volume of quiet ones. This is useful for spoken word material,
etc. as well as nighttime listening.
OFF
Turns off the audio dynamic compression.
< This function is effective only when playing back a DVD disc
recorded with Dolby Digital. This control has no effect on
other discs.
<
The overall effect of this setting depends on many things: the
disc being played, the amplifier, and the speakers used for
reproduction.