Installation manual

6 ©ESP Ltd. Sept 2008
2.1 APPEARANCE
2.2 CHARACTERISTICS
Good looking and efficient
The attractive design allows the unit to be placed in the open in finished
utility spaces and basements; depending on ambient conditions, the cost
of operation can be 25% of that of an electric water heater, and can be
used in locations unsuitable for solar hot water heating.
Environmentally friendly and safer
Produces no harmful emissions locally; there is no combustion of oil,
coal, or natural gas. No carbon monoxide is produced and there is no
open flame.
Easy to operate and multiple heat sources
Contains a timer for start and stop and an adjustment dial for easy setting
of the water temperature; the unit can take heat from a number of sources
- the outside environment, from an attic space, or from hot areas in light
industrial environments.
2.Specs
A) The appropriate Building Regulations: either The Building Regula-
tion (England), The Building Regulations (Scotland) or Building
Regulations (Northern Ireland).
B) The Water Fittings Regulations (England and Wales) or Water Bye
laws (Scotland).
C) Any other applicable Regulations.
Failure to observe any of the above conditions will invalidate the war-
ranty/gurantee.
1.6 HOT WATER AIR SOURCE HEAT PUMP PACKAGE
The unit will be supplied with the fittings detailed in section 1.1 above.
Hot water air source heat pump
1.General Requirements
Hot water air source heat pump