User manual

BASIC WEB OPERATION – CONTROL PANEL BUTTONS
(Internet Explorer / Cloud)
Split
Choose how many camera images you wish to display. For 4 channel DVRs choose ‘view
4’ or for 8 channel DVRs choose ‘view 8’ etc.
Playback
Enters playback mode; used for searching and playing back recordings already stored on
the DVR.
Log Display
Event log information, if any.
Local Cfg
Operate alarm set up on the web end.
Device
Cfg
Right click mouse and select ‘Device Cfg’. You can now adjust most of the DVRs Config
settings as if you were at the DVR in person.
PTZ controls
Only suitable for PTZ cameras.
Picture adjustment
Controls Such as Colour, Contrast etc.
Viewing your cameras
Choose and click a viewing window on the left hand side where you wish to display
your first camera. Next, pick a camera from the right hand list
and double click it. The
camera you have chosen will now be displayed in the left hand window. Adding your
other cameras is the same method; you just have to choose an unused window from the
left hand side for each new camera.
16
DVR8iP Digiview8iPro Manual_Layout 2 12/03/2014 09:33 Page 16