Enterview 3/ 3V/ 3C/ 3VC 6320000026H For your protection, Please read these instructions completely and keep it for future reference Hanmi Building 45, Pang-E Dong, Songpa-Ku Seoul 138-724, Korea Tel 82.2.2240.9234/9271/9273 Web site : www.hyundaitel.
WARNING To prevent injury, the following safety precaution should be observed during installation, use and servicing of the unit. CAUTION RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
IMPORTANT SAFEGUARDS 1. Read Instructions All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions The safety and operating instructions should be retained for future reference. 3. Follow Instructions All operating instructions, maintenance and all warnings should be followed. 4. Cleaning Turn off the power of unit before cleaning. Do not use liquid or aerosol cleaners. Use a dry cloth for the body of unit. 5.
TABLE OF CONTENTS UNIT & COMPONENTS Front/Side/Bottom panel Parts Enclosed 6 8 INSTALLATION & WIRING Installation Wiring 10 11 OPERATIONS How to use Buttons and adjustment on the unit Communication function 14 14 ADDITIONAL INFORMATION Troubleshooting Guide Specifications 16 17 UNIT & COMPONENTS
UNIT & COMPONENTS Optional Cameras Front panel Main unit Front panel Enterview 3 / 3C Enterview 3V / 3VC Enterview Multi Optional Cameras Side & Bottom panel Main unit Side & Bottom panel Enterview 3 / 3V / 3C / 3VC 06|07
Parts Enclosed The parts shown below are provided by the manufacture and are enclosed in the box Handset Main Mounting Bracket / Flush Box / Surface Mount Box Cable / Screw / Wrench Manual (Optional Cameras) Enterview 3 / 3C Enterview 3V / 3VC Enterview Multi OPERATIONS
INSTALLATION & WIRING Installation 1. After determining the mounting locations for both the outside camera and inside monitor 2. At the selected monitor mounting location, attached the mounting bracket securely to the wall. Drill a hole in the center area of the bracket just large enough for the electrical wiring to pull through the hole. Connect the electrical wires from the camera unit to the monitor wiring terminal 3. Connect the handset cord to the monitor unit. 4.
Basic(Single Camera/Single Main) Option 2(Enterview 3V / 3VC) Option 1(Single Camera/Two Main) Enterview 3 / 3V / 3C / 3VC 12|13
OPERATIONS How to use buttons & adjustment on the unit BUTTON Monitor Intercom Door DESCRIPTION ON/OFF of screen, talk through door camera Activate an talk with the intercom Door release ADJUSTMENT DESCRIPTION Brightness adjustment. (In off hook) After pick up the handset, user can adjust the brightness of screen (Mode: Normal/ Brighter) Volume adjustment. (In on hook) After placing the handset, user can adjust the volume of sound (Mode: Normal/ Louder) Communicating Function Turn power switch ON.
ADDITIONAL INFORMATION Specifications Enterview 3 / 3V / 3C / 3VC (Main unit) Remark Voltage Requirements Power Consumption B/W Color Monitor Screen Maximum Wiring Distance Audio Communication Extensions Temperature Environment Humidity Dimension Size Weight Installation Specification 90~250V AC, 50/60 Hz(Smps) Maximum 30VA, Stand by 5VA Maximum 28VA, Stand by 5VA B&W Flat 4 Flat type / Color 4 TFT-LCD 50m/165 feet (22 AWG, 0.
Memo Enterview 3V / 3VC (Pinhole Camera) Remark Power Source Power Consumption Display Input Minimum Illuminance Temperature Environment Humidity Dimension Size Weight Installation Specification DC 13V (supplied from Monitor) DC 13V, 0.17A 1Vp-p/75, Composite CCIR/EIA, PAL/NTSC 0.1 Lux (B/W) / 3 Lux(Color) -10 C ~ 40 C Below 90% (relative) 91.5W 132.5H 18D(mm) / 3-3/5W 5-1/5H 5/7D(Inches) 0.2kg / 0.
Memo
