Specifications

Detection range: 10M x 160° (see Fig. 3)

Fig. 3

Step 3 - Installing the GuardCam

IMPORTANT - IF IN ANY DOUBT ABOUT THE INSTALLATION OF THIS PRODUCT,

CONSULT A QUALIFIED ELECTRICIAN

G This product must be grounded

G Do not mount the unit against inflammable surfaces

G The motion detector will not operate correctly if it is installed:

- Near the outlet of a central heating boiler

- Near air conditioning plant

- Pointing directly at moving vehicles

- Within sight of reflections from moving water

- Where other lamps could shine on the detector

BEFORE ATTEMPTING ANY INSTALLATION OR MAINTENANCE, ENSURE THAT THE

ELECTRICAL SUPPLY IS SWITCHED OFF AND THE CIRCUIT FUSES REMOVED OR THE

CIRCUIT BREAKER IS IN THE OFF POSITION.

Please make sure the voltage and polarity are correct before connection. Incorrect

voltage may cause electric shock. If you are not sure, please contact your retailer.

Note: It is recommend to mount GuardCam 2M above the ground for optimum

performance, do not mount the fixture below 1.2M. See Fig. 3 for details

of performance range.