Owner's Manual

ManualsBrandsESPERIA ManualsAutomotiveCar Radio

⑤ Tuning [ , ] Buttons

Press the [ ] button to increase the reception frequency by one step, and press the [ ]

button to decrease the reception frequency by one step. (Manual channel selection)

Press the [ ] button for 2 seconds or longer, the frequency will automatically change to the

higher side, and press the [ ] button for 2 seconds or longer, the frequency will automatically

change to the lower side, searches for a broadcasting station, and stops when it can be received.

If you want to stop in the middle press again. (Seek channel selection)

Memorizing radio station to the memory

(１) Press the [MODE] button to select FM or MW and select the desired station.

(２) Then search the desired station by the seek or the manual tuning.

(３) Press any button (from ① to ⑥) for 3 seconds or longer.

※If you press the button that has been preset memory for 3 seconds or longer, the preset frequency

will be overwritten with the current frequency.

※You can preset memory for each FM and MW station for each button.

Auto Store Memory

During the radio mode, by pressing and releasing [SCAN] button will automatically store a strong signal station in

memory from the channel ① to the channel ⑥.

CAUTION

: ・Auto store memory overwrites previously stored stations.

・If the desired button does not memorize, please preset it manually.

Owner’s manual

12/24V DAB/DAB+/Bluetooth

USB/MP3/WMA/FM/MW Stereo Radio

Thank you for purchasing this product.

Please read this instruction manual to the end

before use so that you can fully utilize the functions

of this machine and use it effectively.

After reading it, please keep it in a safe place. It is always useful if you have any questions or

problems during use.

Also, if you operate the machine while driving, you may be careless in front of you and cause an

accident. Therefore, be sure to stop the car in a safe place before operating the machine.

MP3/WMA

Operational Panel

② LCD (Liquid Crystal Display)

The receiving band and frequency or the current time will be indicated on the display.

④ Scan [SCAN] Button

In radio mode, press the button to start searching for stations and preset receivable stations.

Buttons ① to ⑥ can be automatically memorized.

① Power [ ] Button

Press the button to power ON. Press again to power OFF.

⑦ Program type [PTY] (DAB/DAB+ ) Button ※Broadcast target area

Select the type of station you are listening to Pop, classical, news and more.

⑧ Volume Control [VOL＋,－] Buttons

Press the [ VOL+ ] button to increase the sound volume, press the [ VOL– ] button to decrease the

sound volume. Press and hold to change the sound volume continuously.

⑫ Mic-IN jack（ Mic In Put）

When using, open the rubber cap and connect a commercially available microphone (φ3.5mm).

※Be sure to close the rubber cap when not in use.

⑬ USB Input Terminal ( ) ※Type A

When using, open the rubber cap and connect it to the USB memory using a commercially available

USB extension cable. If you cannot use the extension cable, use a short type USB memory.

※Be sure to close the rubber cap when not in use.

CH : Radio Mode

DAB : DAB Mode

BLUETOOTH：Bluetooth Mode

USB : USB Mode

For USB Mode only

Audio Operations

FM Stereo

Radio Mode , Frequency,

Preset Memory/

Volume/Clock/Text

Functions

USB Operations

Connect a USB storage device to USB socket on the this unit.

Press the [MODE] button and select the USB mode.

("USB"will be displayed on the display, it becomes a clock display.)

When playing back a USB memory, you can perform the following operations with the preset memory buttons ① to ⑤.

CAUTION

: ・We do not guarantee the connection with all USB memory.

・USB memory playback model is audio compression method MP3 (MPEG-1 Audio Layer3

(～192kbps)), WMA (Windows Media Audio) , play the saved file.

・Insert and remove the USB memory in a mode other than USB mode.

・When connecting to a USB memory, use a commercially available USB extension cable. If

the extension cable cannot be used Please use a short type USB memory.

・Do not connect any device other than USB memory. Smartphones cannot be charged.

・Even if the data on the USB memory is lost or damaged when used in combination with

this unit, we are not responsible for the compensation. Please note that we cannot take

responsibility.

① Previous Track [ ] Button

Skip to the previous track. Press and hold this button to rewind fast-rewind.

② Play/Pause [ ] Button

Pause or resume playback.

③ Stop [ ] Button

If you press the button during playback, playback will stop. When you press the play / pause [ ]

button, the beginning of the song that was playing. Playback starts from.

④ Next Track [ ] Button

Skip to the next track. Press and hold this button to rewind fast-forward.

⑤ Repeat [ ] Button

Repeat the current track. Press the repeat button again, turn off the repeat mode.

⑩ Bluetooth LED

When this LED lights up, the Bluetooth device is connected. Flashes in pairing standby mode.

⑨ Bluetooth [ ] Button

Press the button to connect to the last Bluetooth compatible device that has registered (Pairing).

Press the button until you hear a beep, connection (registration) is released and the pairing stand-

by mode is set.

⑪ Mode Select [MODE] Button

Press the button to switch the operation modes as shown.

In Bluetooth mode and USB mode, the display switches from frequency to clock.

USB

Radio Manual tuning

Radio SEEK tuning

Listening the DAB/DAB+ ※Broadcast target area

DAB/DAB+ Frequency Manual tuning ※Broadcast target area

(１) Press the [CLOCK, clock ADJ] button to switch the LCD display.

PTY-> Frequency-> Clock-> List No,

(2) Select the desired broadcasting station by pressing the [ ] or [ ] button.

Bluetooth

Pairing display

※For Bluetooth Mode or USB Mode only

DAB/DAB+ PTY Manual tuning ※Broadcast target area

DAB is one of the digital radio broadcasting systems currently available.

It can provide digital quality sound without annoying interference or signal distortion. In addition, it can

carry text and data.

(１) Turn the ignition key to ACC or ON, and press the [ ] button to turn on the Radio.

(２) With the [MODE] button, select DAB.

(３) Press the [SCAN] button to automatically scan and memorize the stations that can be displayed.

(４) Use the [① ～ ⑥] or [ ] or [ ] buttons to select the desired station.

(５) To turn off the radio, press the [ ] button.

Select the desired program type (PTY) from the station types that can be selected

by pressing the [PTY] button, and then pressing the [ ] or [ ] button to

select from pop, classic, news, and so on.

Listening the radio

(１) Set the ignition key to ACC or ON and press the [ ] button to turn on the radio.

(2) Select the desired band FM or MW by the [MODE] button.

(3) Use the preset memory button or tuning button to select a channel and adjust the volume.

(４) To turn off the radio, press the [ ] button.

Receiving FM stereo broadcasting

When you receive an FM stereo broadcast, "ST" will appear on the display. When the reception con-

dition deteriorates, it automatically switches to monaural with less noise and the "ST" display disap-

pears.

FM → MW → DAB → BT→ USB

About the waterproof performance of this machine

(１)This machine is not waterproof. The front panel is drip-proof, but do not splash water directly on it.

Surroundings and inside Water may get into the part and cause a fire, electric shock, or malfunction.

(２)Make sure that the rubber cap is completely closed before use.

(３)Do not give a shock to this machine. Damage may cause deterioration of waterproof performance.

⑥ Preset Memory [①～⑥] Buttons (Bluetooth control, USB button combined)

One FM and one MW station can be preset memory for each button.

※For Bluetooth mode and USB mode operations, "Play audio of Bluetooth device" and "USB

Operations" please see.

24V

12V

KRH-M505

Select the channel manually. Press the [ ] button to increase the reception frequency by one

step, and press the [ ] button to decrease the reception frequency by one step.

Press the [ ] button for 2 seconds or longer, the frequency will automatically change to the higher

side, and press the [ ] button for 2 seconds or longer, the frequency will automatically change to

the lower side, searches for a broadcasting station, and stops when it can be received. If you want

to stop in the middle press again.

③ Clock

[CLOCK

CLOCK ADJ.

] Button

While receiving radio, press the button to change the display to a clock, and press it again to dis-

play the frequency.

If you press and hold (2 seconds or more), "ADJ" will be displayed on the display,

"Clock" will blink and the clock adjustment mode will be set.

In DAB mode, pressing this button will switch the LCD display.

PTY-> Frequency-> Clock-> LIST

Summary of content (4 pages)

PAGE 1
Listening the DAB/DAB+ Owner’s manual KRH-M505 12/24V DAB/DAB+/Bluetooth®/ USB/MP3/WMA/FM/MW Stereo Radio USB MP3/WMA 24V 12V Thank you for purchasing this product. Please read this instruction manual to the end before use so that you can fully utilize the functions of this machine and use it effectively. After reading it, please keep it in a safe place. It is always useful if you have any questions or problems during use.
PAGE 2
Using Bluetooth wireless technology Trouble shooting Mobile phones and audio devices that support Bluetooth can be connected to use with this unit. You will be notified that there is an incoming call by connecting the mobile phone. ※If the microphone is not installed, this unit cannot handle calls. In order to use Bluetooth devices must be able to match certain profiles. this unit is compatible with following profiles.
PAGE 3
English： Declaration of conformity We use this model KRH-M505 Seapáinis： dearbhú comhréireachta Tá muid an múnla KRH-M505 In accordance with the provisions of the 2014/53/EU and 2014/53 / AE agus 2011/65 i gcomhréir le forálacha na treor2011/65 EU directive, we have established basic require- ach AE, lena sainmhínítear na ceanglais bhunúsacha agus rialacháin ábhartha eile. ments and other relevant rules.
PAGE 4
FCC 15B ClassB CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.