Installation Instructions

Insert the connecting wire to the cable on the interior lid9

Insert the cylinder tailpiece to the

thumbturn (the thumbturn should

be in vertical position when the

latch is retracted ).

Insert the cylinder tailpiece to the

thumbturn (the thumbturn

should be in horizontal position

when the latch is retracted).

Install the thumbturn10

Please retract the latch bolt before you install the thumbturn as follows.

Notice:

After you install the thumbturn, test it to make sure it moves correctly.

Look from the door outside Look from the door outside

Left side opening

Note:

Ì¸» »¨¬»®·±® µ»§°¿¼ · ·²¬¿´´»¼ ±²

¬¸» ´»º¬ ·¼» ±º ¬¸» ¼±±®ò

Right side opening

Note:

Ì¸» »¨¬»®·±® µ»§°¿¼ · ·²¬¿´´»¼ ±²

¬¸» ®·¹¸¬ ·¼» ±º ¬¸» ¼±±®ò