User's Manual

ESP8266UserManual 
10 / 12Espressif SystemsJune 19, 2014
serialportandrepeatStep2andStep3.
Step7: select and download next bin file which you aregoing to burn into the
flash,forexample,eagle.app.v6.irom0tex t.bin.


 Note: the corresponding Program AddressO ffset for eagle.app.v6.irom0text.bin
is0x40000.Pleaserefertobindirectorydescriptionsin"4.2DirectoryStructure".
 Step8:closeserialport


 After the downloading, users can check and print relevant information with
SecureCRT.
SetthejumperonthemotherboardasMTDO：0，GPIO0：1，GPIO2：1,thenit
willenteroperatingsmode.
Note:pleasedisconnectthepowerwhensettingthejumpers.