User's Manual

MākuSafe Wearable Device User Manual
3. Continue to hold down the button and speak towards the wearable device to record up to
a 15 second voice memo.
4. After completing a voice memo, release the button.
Returning a Wearable Device to the Base Station
1. Find an open bay in any base station installed at your facility.
2. Remove the wearable device from the holster by gently pressing up on the bottom of the
wearable device. (Figure 9)
Figure 9
3. Insert the wearable device into any open base station bay. If the device needs to be
charged, a red light will light up on the device shortly after it is inserted. When the device
has enough charge, a red light will flash around the bay. (Figure 10)
Figure 10
Confidential  Page 7 of 10