Operation Manual

28
Time
How to change the time:
1. In the Setup menu, you can navigate
with the
buttons and select
Time.
2. Use the right rotary knob to adjust the
selection. Use the left rotary knob to
switch between hours and minutes. At
the same time, you can set the time
format as either 12 or 24 hours.
3. Then press the
button to confi rm.
Switching the control module on for the fi rst time
When you fi rst switch on, you are prompted to set the date/ time and the screen language.
Change the calendar and language settings as follows:
Menu structure
Press the MENU button to enter the main menu.
1. Use the
buttons to switch
between calendar and language and
use the left and right rotary knob to
adjust the settings.
2. Confi rm your setting by pressing the
button.
1. Use the
buttons to navigate
through the menu.
2. The
dot indicates the current
position.
3. Confi rm your selection by pressing the
button.
4. If necessary, close the menu by
pressing the MENU button.
3. Press or turn any control button apart
from the MENU button. This takes
4. Use the left rotary knob to set the
temperature you want.
5. Use the right rotary knob to adjust the
speed.
6. Use the
buttons to adjust the
time manually.
7. Pressing the
button increases the
speed for a short time (Turbo).
Settings
You can adjust various settings in the Setup sub-menu.
Date
How to change the date:
1. In the Setup menu, you can navigate
with the
buttons and select
Date.
2. Use the right rotary knob to adjust the
selection. Use the left rotary knob to
switch between year, month and day.
3. Then press the
button to confi rm.
1.
2.