User Guide

2
STARTING STEPS
Before using your F-60 EVO:
- Make sure that the battery is full. If the battery level is low, use the USB cable to load it.
- Format the micro SD memory card
- Set data and time
Now you can proceed with all other parameters settings of your F-60 EVO according to your needs.
USING THE VIDEO CAMERA
-Recording a video
In the preview state press the <REC> key on the front of the camera to start video recording.
The video recording duration is displayed in the upper right part of the TFT screenand on the LCD display.
To stop recording press <STOP> key.
-Taking a picture
In the preview state press the <PHOTO> key
PLAYING A FILE
To view the files on F-60 EVO video camera press the <BACK> and move on the desired image or video using the navigator
key; confirm your choice with the <OK> key.
DELETING AND LOCKING A FILE
In playing mode you can cancel and protect a file.
With the moving keys move on the desired file. Press the<MENU>key to
1) delete
2) lock one or more image/video files.
It is possible to delete and/or protect both the single file and all recorded files.
WI-FI USE WITHSMARTPHONE
Thanks to an in-built wi-fi module, that can be turned on from the front side, F-60 EVO can be connected to and checked from
phone devices such as Iphone or Smartphone with Android system. The Videocamera can be controlled by remote by
downloading NILOX F-60 EVO APP on your phone.
Your smartphone can be usedas remote controller or display, both to control in real time the video recording and to display the
videos and picturessaved.
DISPOSITIVI DI OUTPUT
F-60 EVOcamera has audio and video Hdmi output interfaces and one data usb output.
Video out
You can connect the photocamera to a video input through HDMI micro connector.
Once connected, the video camera can perform all its functions.
The display or the TV, connected to the video camera, works exactly like the TFT display of the video camera.
Usb interface
The USB connection allows to:
-Give power supply to F-60 EVO video camera
-Connect the video camera to a computer in order to read the data in its memory and in the micro SD card.
PRECAUTIONS
Precautions for the waterproof case
The waterproof case is a precision component. Please use the following precautions:
• Do not randomly dismount and mount the O-ring of the case, keys and lens cover without assistance, otherwise the
waterproof performance deteriorates.
• Do not put the case in a place where corrosive gases are easily generated due to the existence of strong acid or alkali
and keep it away from chemical or corrosive substances.